Products
인서트 N-i90A series
NANOLOY Multifunctional Milling Tool
N-i90A series
Low cutting force, high efficiency at high feed, deep depth of cut
Multifunctional milling tool
- 1. Possible to apply various range of milling
- 2. Excellent performance in machining stainless steel, mold steel
- 3. Low cutting force, high efficiency at high feed, deep depth of cut
- 4. Specially designed for side milling
NUMBERING SYSTEM & FEATURES
NUMBERING SYSTEM
Features (Insert)
Features (Cutter)
Face
Side
Slotting
Inclined Surface
Helical Milling
APPLICATION (INTERNAL / EXTERNAL TEST)
Internal Test
INTERNAL TEST (SUS304)
Stainless steel side milling
- Workpiece : SUS304 (Austenite)
- Cutting conditions : vc=130m/min, fz=0.25mm/z, ap=4mm, ae=4mm wet
- Insert : APKT11T308PDER-NM /AC3025
- Cutter : I90A11R3020S20
INTERNAL TEST (STD61)
Mold steel side milling
- Workpiece : STD61
- Cutting conditions : vc=120m/min, fz=0.3mm/z, ap=5mm, ae=3mm wet
- Insert : APKT11T308PDER-NM / AC3025
- Cutter : I90A11R3025S25
External Test (SUS304)
Pipe flange
- Workpiece : SUS304
- Cutting conditions : vc=180m/min, fz=0.2mm/z, ap=4mm, ae=1.5 wet
- Machining type : Face & Side
- Insert : APKT11T308PDER-NM / AC3025
- Cutter : I90A11R3020S20
- TEST Results -
| Nanoloy | Competitor | |
|---|---|---|
| Comparision of wear resistance |
 |
 |
| Tool life |  |
|
| Results | Increased tool life 160% | |
External Test (STD61)
Mold base
- Workpiece : STD61
- Cutting conditions : vc=150m/min, fz=0.25mm/z, ap=5mm, ae=1.5 wet
- Machining type : Face
- Insert : APKT11T308PDER-NM / AC3025
- Cutter : I90A11R3025S25
- TEST Results -
| Nanoloy | Competitor | |
|---|---|---|
| Comparision of wear resistance |
 |
 |
| Tool life |  |
|
| Results | Increased tool life 150% | |
COPYRIGHT © NANOTECH. ALL RIGHTS RESERVED.